The function of the oil-air separator is to separate the oil in the compressed air to make the compressed air cleaner. After the oil is separated, it passes through the oil return pipe to make the oil circulate in the compressor. The oil and gas separator produced by Sanya uses anti-corrosion materials, fine welding technology and the use of the latest double-sided adhesive to ensure that the oil has a high mechanical strength, and the oil and gas separator can work normally at a high temperature of 120 degrees Celsius. The skeleton and flange of Thirty Asia's oil and gas separator are made of 316L stainless steel, and the filter layer adopts 4-layer filtration, with a filtration accuracy of 0.1 micron, an oil content of less than 3PPm, and a service life of thousands of hours.
1.Air compressor oil filter parameters
| Filter material: made of imported glass fiber | |||||
| Service life: up to about 2600h | |||||
| Filtration accuracy: 10-15μm | |||||
| Filtration efficiency: 99.98% | |||||
| Specifications: complete specifications support customization | |||||
| Maximum working pressure difference 89 (MPa) | |||||
| Import and export path 85 (mm) |
2.Craftsmanship
1.Automatic wrapping machine:
Automatically adjust the winding tension to meet the tightness of the filter layer required during product design.
2.Corrugated metal mesh for filter layer:
Increase the strength of the ripple while protecting the filter structure
3.Middle skeleton collusion process:
The helical collusion structure of the middle skeleton greatly enhances the radial direction of the skeleton
Compressive strength to avoid deformation of the skeleton structure caused by excessive pressure difference.
4.Sandblasting process:
The process of using the impact of high-speed sand flow to clean and roughen the surface of the substrate.
Sandblasting can increase the roughness of the bonding surface of the end cover, and improve the bonding strength on the basis of ensuring the sealing performance of the end cover and the filter layer.
5.Oil dispensing glue machine:
The precise control of the temperature of the glue liquid and the amount of glue can ensure the product has a higher stability.
6.Outer frame collusion process:
The skeleton structure has no solder joints, avoiding secondary galvanizing, which is more environmentally friendly and the product is more beautiful
3.Installation note
Before installation, you must check whether the rubber and asbestos pads have anti-static properties (conductive nails must be installed). It is necessary to prevent dirt from falling into the oil drum during installation. When installing the return pipe, make sure that the pipe is inserted into the bottom of the filter element.
1. Regular blowback according to the situation
2. The rated air intake of the filter element must be greater than the rated air intake of the host
3. Choose an air filter element with low air intake resistance and large dust holding capacity
4. Place the filter element in a dry and ventilated place to prevent moisture from affecting its service life
Hot Tags: 88290015-049 air oil separator, China, manufacturers, suppliers, factory, customized, Ultrafilter Compressed Air Filter 1C020291N, Air Inlet Filter 5929 0101 20, Air Inlet Filter 5929 0101 10, Oil Mist Filter Element CMD10048, Air Compressor Oil Filter CST45027 01 Replacement, Ultrafilter Compressed Air Filter 1C020281
