Alup Oil Separator 21200110

Ayater oil separator Specifications

• Continuous operating temperature: max. 100 °C, for short periods: max. 120 °C

• Ayater tests using standard oils for compressors (ISO VG46) 

• Pressure drop (500 hrs) : < 0.3 bar

• Residual oil content (500 hrs) : < 3 mg/Nm³

• Service life: 500 hrs up to 4.000 hrs (under ideal conditions, depending on the application)

Oil separator judgement standard

The following points are valid for the compression of the ambient air under standard conditions.

•  The oil content of the compressed air is lowered through preseparation. The maximum oil content after preseparation should not exceed a value of approx. 5 g/Nm 3 .

•  Sufficient distance to oil level (approx. > 0.5 of the diameter of the separator)

•  No direct flow to the separator

• The permitted volume flow rates. Local peak loads (with pressure reduction) or load undercutting (pressure increase) should also not exceed the given ranges.

•  The oil scavenge line must be large enough to return the separated volume of oil.

Alup oil separator 21200110

Alup 21200110 Dimensions