Oil Filter 1631011801

Ayater  Oil Filter 1631011801 Feature

Oil filter elements are used to remove contaminants from oil in a compressor system. Required filtration efficiencies are obtained through the exclusive use of high grade filter media and consistent surface area control, obtained by a strict maintenance of pleat quantity and depth. Oil filter leakages are prevented by the positive seals obtained with both plastisol and epoxy encapsulation. Viton seals are used where applications of synthetic oil are typical.

Ayater Oil Filter 1631011801 Structure

Ayater  Oil Filter 1631011801

Oil Filter 1631011801 CHANGE PROCEDURE

1. Stop the machine, electrically isolate and vent all trapped pressure.

2. Loosen the oil filter with the correct tool.

3. Remove the oil filter from the housing.

4. Place the old filter in a sealed bag and dispose of it in a safe way.

5. Clean the mating face of the housing taking care to avoid any particles entering the machine.

6. Remove the new FILME replacement filter from its protective package.

7. Apply a small amount of lubricant to the filter seal.

8. Screw the new filter down until the seal makes contact with the housing, then hand tighten a further half-turn.

9. Start the compressor and check for leaks.

10.Reset the oil filter service warning.