The hydraulic oil filter element is a mesh made of multi-layer metal stamping, which is manufactured through special lamination and vacuum sintering processes. It is a new type of filter material with high mechanical strength and overall rigidity. The meshes of each layer of wire mesh are interlaced to form a uniform and ideal filtering structure, which not only overcomes the low strength, poor rigidity, and unstable mesh shape of ordinary metal wire mesh, but also can control the pore size of the material. Permeability and strength characteristics are reasonably matched and designed, so that it has excellent filtration accuracy, filtration resistance, mechanical strength, wear resistance, heat resistance and processability. The overall performance is significantly better than that of sintered metal powder, ceramics, Fiber, filter cloth, filter paper and other types of filter materials.
1.structure
1.Filter element end cover: machined end cover, spin stamping cold plate end cover, ABS engineering plastic end cover, stainless steel end cover, customized end cover.
2. Filter frame: spiral frame, punching plate frame, plastic frame, stainless steel frame, customized frame.
3. Filter element filter layer: metal filter layer, paper filter layer, glass fiber filter layer, non-woven filter layer, customized filter layer.
4. Filter element meeting: meeting sheet meeting (798 glue), potting glue meeting, roll welding meeting), customized meeting
2.Parameter
1.Filter material: glass fiber, pure wood pulp paper, stainless steel metal mesh, sintered mesh
2.Filtration accuracy: from 1, 3, 6, 12, 25...μm Filtration ratio: X≧100
3.Structural strength: 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa
3.Replacement time of hydraulic filter element
1.In addition to checking the color, viscosity, and odor of the oil, the oil pressure and air humidity should also be checked.If you are working in a higher altitude and lower temperature environment, you must also pay close attention to the carbon content, colloids (olefins)and sulfides in the engine oil,as well as the impurities, paraffin and moisture content in the diesel.
2.Hydraulic excavators generally need to replace the hydraulic oil after 2000 hours of operation, otherwise it will pollute the system and cause system failures. According to statistics, about 90% of hydraulic system failures are caused by system pollution
3.In special circumstances, if the machine uses low-grade diesel (the sulfur content in the diesel oil is 0.5%~1.0%), the diesel filter and the machine filter should be replaced every 150h; the diesel filter should be replaced every 60h if the sulfur content is above 1.0%. Machine filter. Use crushers, vibratory rammers and other equipment that has a heavy load on the hydraulic system. The replacement time of the hydraulic return filter element, pilot filter element and respirator filter element is every 100h.
4.Shipping
5.Tips
The product filter material can be customized, and the basic parameters change with the change of the filter material. The filter material has a maximum critical value, and the specific attributes can be consulted by sales and technical personnel.
Hot Tags: 1300r020bn4hc hydraulic filter element, China, manufacturers, suppliers, factory, customized, Argo Filters Catalogue P3 0730 51, Mahle Oil Filter Replacement PI23010RNSMX10, Atlas Copco 1621737600 Air Filter Element, HYDAC Filter
