Internormen Pressure Filter 01.E.360.130G.30.E.P

Features of Ayater hydraulic filter  

1. Material: HV fiberglass, Ahistrom filter paper, stainless steel wire mesh

2. Filter accuracy: from 1, 3, 6, 12, 25 …um

3. Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 21.0Mpa

4. Application field: hydraulic system, lubrication system

5. O-Ring: NBR, fluororubber

Internormen Filter TYPE CODE

We'll use the Type Code 01.E.360.130G.30.E.P as an example:

SERIES:  01.E (Pressure, Return-Line and Lubrication Filter Elements)

NOMINAL LENGTH (mm):  30, 60, 90, 150, 170, 240, 360, 450, 600, 900, 1350

RETENTION:  3, 6, 10, 16, 25, 40, 80 (microns)

MATERIAL:VVG=microglass       G=stainless steel wire mesh

DIFFERENTIAL PRESSURE RATING: 30 bar (232 PSI)       160 bar (2,320 PSI)

DESIGN:  E=single open end

SEAL MATERIAL:  P=nitrile        V=Viton

SPECIFICATIONS:  - = standard (blank or a dash)   IS06= HFC applications (water glycol fluids for fire-resistant systems)   VA= stainless steel/ 

Internormen Filter 01.E.360.130G.30.E.P

Our products through the following test

ISO 2941 Collapse & Burst Resistant

ISO 2942 Material Compatibility with Fluids

ISO 2943 Material Compatibility with Fluids

ISO 3724 Flow Fatigue Characteristics

ISO 3968 Pressure Drop vs. Flow Rate

ISO 16889 Multi-pass Performance Testing

Our workshop