The pressure filter element adopts glass fiber filter material, which has the advantages of high filtration accuracy, large oil transfer capacity, small original pressure loss and large dirt holding capacity.
The DFBH/HC240TE10A1.0/12 pressure filter can be mounted directly on the valve block of the system to further remove or block contamination particles due to external intrusion or wear of the component. Especially suitable for automatic control systems and servo systems. At the same time, it also prevents high-precision control elements and actuators from quickly wearing out or seizing due to contamination, thereby reducing failures and extending the service life of components.
DFBH/HC240TE10A1.0/12 pressure filter is equipped with differential pressure signaling device, when the filter element pollution is blocked to a certain pressure difference in the oil inlet and outlet, the switch signal is issued, at this time the filter element should be replaced or cleaned to achieve the purpose of protecting the safety of the system.
Size | 240 |
End Size | 1 1/4 in. |
End Type | SAE Straight Thread O-ring Boss Ports |
Filter Rating | 10um |
Flow | 160 L/Min |
Head Material | Ductile Iron |
Mounting Type | Inline Filter |
Max Operating Pressure | 420 bar |
Max Operating Temperature | 212 °F |
Min Operating Temperature | 14 °F |
Bowl Material | Steel |
Cap Material | Steel |
Diameter | 119 mm |
Height | 302.5 mm |
Width | 125 mm |
Seal Material | Nitrile Rubber (NBR) |
Hot Tags: dfbh/hc240te10a1.0/12 pressure filter, China, manufacturers, suppliers, factory, customized, Hydac 0250DN010BN4HC Hydraulic Filter Element, Hydac Filter Element 0040RN006BN4HC, Return Filter Element 0160D010BH4HC, Hydac Pressure Filter 2063870, Hydac Filter Element, Hydac Filter Element 0100RN010BNHC
