Carbon Steel Side Entry Bag Filter Housing

Carbon steel side entry bag filter housing is a filter system.These housings are made from carbon steel, which is widely used for its strength, durability and low cost.If space constraints or flow dynamics require a more horizontal inlet/outlet configuration,the built-in design has this advantage and is suitable for environments with limited space.Its interior houses and supports filter bags designed to remove particulate contaminants from liquids or gases.

1. The carbon steel shell securely connects all components.It is usually equipped with flanged or threaded connections to facilitate the installation of inlets, outlets and other connections.Housings may also be equipped with pressure gauges or vent valves to monitor and manage internal pressure.
2. Filter bags are designed to prevent the bag from collapsing under pressure or falling apart during the filtration process.
3. Use gaskets or seals at housing interfaces to prevent bypass.
4. The drain port is used to remove accumulated sludge or debris from the bag.
5. Vents release trapped gas inside.

• The side entry design achieves more uniform flow distribution around the filter bag and high filtration efficiency.
• Side-entry configurations save space compared to top-entry configurations.
• The side-entry design allows more direct access to the filter bag and is easy to install and maintain.
• Tangential side inlets create smooth flow patterns inside the housing,the filter bag is less susceptible to interference.
• Carbon steel casings are coated or painted to increase their corrosion resistance.

• Bioengineering and medicine
• Electronic plating industry
• Automobile manufacturing industry
• Paint and ink production
• Petrochemical industry
• Food and beverage
• RO filtration