High-flow water filter cartridge is processed by a variety of composite materials through special technology, with hydrophilic characteristics, it can not only filter out mechanical impurities in the medium, but also through demulsification, coalescence, so that the emulsified state of water is separated from the medium, and coalesced into larger water droplets, in order to facilitate further purification of the medium
Replacement 3M high flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6.5 inches / 165mm, no center rod, unidirectional opening, The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs.
| Filter Media： | Polypropylene |
| Support/Drainage： | Polypropylene(PP) |
| End Cap Material： | Glass fiber reinforced Polypropylene(PP) |
| Seal Material： | EPDM, Buna-N, Silicone |
| Length： | 20"(508mm), 40"(1016mm), 60"(1524mm) |
| Outside Diameter： | 6.5inch (165mm) |
| Inside Diameter： | 3 inch (76.2mm) |
| Filtration Rating： | 1μm, 3μm, 5μm, 10μm, 20μm, 50μm, 70μm,100μm |
| Max. Operating Temperature： | 80°C |
| Recommend DP for change-out： | 2.1~2.4bar |
| Filtration Area： | 18㎡@60inch,12㎡@40inch |
HF40PP010A01 | 70-0201-5632-2 | RTM41HF005E | 70-0201-5558-9 |
HF40PP005A01 | 70-0201-5634-8 | RTM41HF010E | 70-0201-5560-5 |
HF60PP010A01 | 70-0201-5648-8 | RTM41HF020E | 70-0201-5562-1 |
HF60PP005C01 | 770-0201-5652-0 | RTM41HF030E | 70-0201-5564-7 |
RHF010EH | 70-0201-5663-7 | RTM41HF050E | 70-0201-5566-2 |
RHF020EH | 70-0201-5667-8 | RTM41HF070E | 70-0201-5568-8 |
RHF030EH | 70-0702-5677-4 | RHF050EH | 70-0201-5556-3 |
Hot Tags: rtm41hf005e high-flow cartridges, China, manufacturers, suppliers, factory, customized
