PP pleated filter element EPF020F03FH, the propylene PES filter membrane and PP end cap and frame are used as raw materials. The materials are clean and will not cause secondary pollution. The folding of the internal filter layer not only increases the filtration area and efficiency, but also increases the dirt-holding capacity. The layered interception mechanism intercepts particles step by step, greatly extending the life of the filter element.
|
Model |
EPF020F03FH |
|
Cartridge Length |
10 in |
| Precision | 0.4µm |
|
Media |
PES |
|
Cap |
222 o-ring & Flat Cap |
|
Structure |
PP |
|
O-ring |
Fluorocarbon |
| PP pleated filter element EPF020F03FH |
| 1. No metal frame, reducing losses caused by discarding |
| 2. 0.4 micron absolute filtration accuracy |
| 3. Pleated filter with large filtration area |
| 4. Low installation cost |
| 5. PES is hydrophilic,no need for pre-wetting |
| Cartridge Type | Filter Rating (μm) | Configuration | Lenghth (in) | End Cap | O-ring |
| EPF |
004 - 0.04 020 - 0.20 |
F |
01 - 10 02 - 20 03 - 30 04 - 40 |
c - 222 O-ring & Spear F - 222 o-Ring & Flat Cap |
B - Fluorocarbon H - Clear Silicone |
| EPF004F02CB | EPF004F03CB | EPF004F02CH |
| EPF004F02CH | EPF004F03CH | EPF004F01CH |
| Please contact us for details. | ||
ISO14001:2015
ISO45001:2018
ISO9001:2015
Hot Tags: pleated pp filter element epf020f03fh, China, manufacturers, suppliers, factory, customized
