Air Compressor Oil Trap

1.Company advantage

1. Factory direct sales, direct profit to you.
2. Engaged in the research and manufacture of filtration products for many years, and the quality is guaranteed.
3. A large-scale modern production workshop of 4000 square meters, applying foreign technology and equipment to ensure product quality.
4. Complete types and support customization.
5. The products can be customized and we have our own factory.
6. The products are sold to many countries at home and abroad.

 2.Air compressor oil replacement method:

1) Built-in models:1. Stop the air compressor, close the air pressure outlet, open the drain valve, and confirm that the system has no pressure.2. Disassemble the pipeline above the oil and gas barrel, and at the same time remove the pipeline from the outlet of the pressure maintenance valve to the cooler.
3. Remove the oil return pipe.4. Remove the fixing bolts of the cover on the oil and gas barrel, and remove the upper cover of the barrel.5. Remove the oil and gas separator and replace it with a new one.6. Install in the reverse order of disassembly.
(2) External models:
Stop the air compressor, close the air pressure outlet, open the drain valve, and after confirming that the system is pressure-free, remove the old oil and gas separator and replace it with a new one.

3.Advantage

1.Thickened shell: 0.8mm thick galvanized sheet is used to withstand high pressure and will not be deformed under high pressure

2.Imported filter paper: American HV glass fiber filter paper, with good oil and gas separation effect as low as 3ppm, initial pressure difference <0.02MPA, which can ensure the quality of oil, and the machine does not need to replenish oil during a maintenance cycle

3.High pressure oil does not run off
Easy maintenance, clean and no residue