The function of the oil-air separator is to separate the oil in the compressed air to make the compressed air cleaner. After the oil is separated, it passes through the oil return pipe to make the oil circulate in the compressor. The oil and gas separator produced by Sanya uses anti-corrosion materials, fine welding technology and the use of the latest double-sided adhesive to ensure that the oil has a high mechanical strength, and the oil and gas separator can work normally at a high temperature of 120 degrees Celsius. The skeleton and flange of Thirty Asia's oil and gas separator are made of 316L stainless steel, and the filter layer adopts 4-layer filtration, with a filtration accuracy of 0.1 micron, an oil content of less than 3PPm, and a service life of thousands of hours.
1. Installation note
Before installation, you must check whether the rubber and asbestos pads have anti-static properties (conductive nails must be installed). It is necessary to prevent dirt from falling into the oil drum during installation. When installing the return pipe, make sure that the pipe is inserted into the bottom of the filter element.
1. Regular blowback according to the situation
2. The rated air intake of the filter element must be greater than the rated air intake of the host
3. Choose an air filter element with low air intake resistance and large dust holding capacity
4. Place the filter element in a dry and ventilated place to prevent moisture from affecting its service life
2.Filter element material
1. Use HV glass fiber material
The filter element of the oil fine separator is made of HV glass fiber composite filter material, and the misty oil and gas in the compressed air can be almost completely filtered out when passing through the oil separation element.
2. Exoskeleton
The use of anti-corrosion materials, strict welding technology and the use of new adhesives ensure good mechanical strength of the oil and gas separator
3.End cap
PC end cover, iron end cover (iron end cover with sealing ring)
Adhesive end caps, welding end caps
Due to the connection of the equipment and the fixing and sealing of the filter layer, the connection size is accurate.
Hot Tags: separator in compressor, China, manufacturers, suppliers, factory, customized, Ultrafilter Compressed Air Filter 1C020281, SANSUNG Air Compressor Air Filter CST71005, Air Inlet Filter 5929 0101 20, Oil Mist Filter Element CMD10048, Air Compressor Hydraulic Oil Filter CST45003 03, Air Compressor Oil Filter CST45027 01 Replacement
