The coalescing filter element I-633C5 is 838.2mm long and has an outer diameter of 152.4mm. It is made of f iberglass and has a high precision of 0.4 microns, ensuring that even the smallest particles and droplets can be captured and removed. This not only ensures a clean and efficient system,...
The coalescing filter element I-633C5 is 838.2mm long and has an outer diameter of 152.4mm. It is made of fiberglass and has a high precision of 0.4 microns, ensuring that even the smallest particles and droplets can be captured and removed. This not only ensures a clean and efficient system, but also extends the service life of downstream components, reducing the need for maintenance and replacement, which has a very positive impact on industrial production.
Model | I-622C5 |
Micron rating | 0.4 μm |
Outside diameter | 152.4 mm |
Length | 838.2 mm |
Inside diameter | 88.9 mm |
End cap configuration | Open end |
Application | Industrial |
Seal material | Buna-N |
The coalescing filter element I-633C5 can withstand high flow rates and is designed to provide low differential pressure, ensuring it does not impede the flow of the liquid or gas being filtered. This means lower operating costs and increased system efficiency.
The coalescing filter element I-633C5 is also easy to install and maintain. It is designed to fit into the corresponding filter housing for quick and easy replacement. The end cap design allows users to replace the filter element without special tools or long downtime.
CM-14-5 | CM-14SB-5 | CM-22-5 |
CAA14-5SB | CAA28-5 | CAA38-5 |
CM-11-5 | CAA56-5SB | CAA43-5SB |
There are many models produced, only part of the display is displayed, there are other models or customized needs can contact us. | ||
Hot Tags: coalescing filter element i-633c5, China, manufacturers, suppliers, factory, customized
