High Flow Water Filter Cartridge HFU640UY100J

The High Flow filter is suited for applications such as cooling water, pre-RO, and resin trap filtration. It is a large diameter, coreless, single open-ended, pleated cartridge with an inside to outside-flow pattern. The filter's unique crescent-shaped pleat geometry, combined with its large 152 mm / 6 in diameter, reduces the number of filters and size of housing required. The cartridge is also available in a wide range of media types for other applications.

Send Inquiry→

Features of High Flow water filter cartridge HFU640UY100J

• Up to 50% smaller filter system possible

• Up to forty times fewer elements to change out

• Very high flow rates per filter cartridge, up to 500 GPM / 114 m3/hr

• Available in 508 mm / 20 in, 1016 mm / 40 in and 1524 mm / 60 in lengths

• Coreless construction to minimize waste disposal

• Absolute rated filter medium for reproducible performance

• Inside to outside flow configuration - all contaminants held within the single open-ended filter

Specifications of High Flow Water Filters HFU640UY100J

Filter Medium	Glass Fiber, PP, MBPP
Support and Drainage	PP
End Caps	glass fiber reinforced polypropylene
O-ring Seal Material	EPR, Nitrile Rubber
Removal Ratings	1μm, 4.5μm, 6μm, 10μm, 20μm, 40μm, 70μm, 100μm
Length	20inch (508mm) / 40inch (1016mm) / 60inch (1524mm)
Outer Diameter	6 inch (152mm)