Optimize baghouse capacity with the P199415 replacement dust collection cartridge filters. 180 sq.ft oval design lowers air velocity. Request a quote!
Expanding extraction capacity without altering the physical housing footprint demands structural innovation. The interchangeable substitute for the P199415 Dust Collection Cartridge Filters utilizes an advanced oval profile to overcome spatial airflow limitations. By integrating 180 sq.ft of media within a 11.4" x 14.4" dual-open framework, it permits seamless vertical stacking while widening internal drop-out corridors. Industrial engineers can effectively decrease interstitial air velocities, securing steady pneumatic extraction and prolonged operational stability.
Oval-Shaped Airflow Optimization: The 11.40 x 14.40 inch elliptical cross-section circumvents the aerodynamic choking effect typical of bulky round filters, yielding broader gaps for abrasive particles to descend smoothly.
Dual-Open Stacking Capability: Configured with open top and bottom endcaps, these replacement industrial Dust Collection Cartridge Filters facilitate continuous tandem alignment, effectively multiplying the extraction volume per housing slot.
180 Sq.Ft Density Equilibrium: Balances a substantial 180 square feet of pleat surface within a 26-inch vertical span. This configuration maintains a low face velocity to resist aggressive particle penetration in demanding environments.
| Structural & Spatial Indices | Calibrated Engineering Values |
| OEM Reference | Interchangeable Replacement for P199415 |
| SEO Component Classification | Dust Collection Cartridge Filters |
| Exterior Geometry | Oval / Elliptical |
| Outer Dimension Span (OD) | 11.40 x 14.40 Inches (approx. 289.5 x 365.7 mm) |
| Internal Exhaust Bore (ID) | 11.40 Inches (approx. 289.5 mm) |
| Vertical Stature (Length) | 26.00 Inches (approx. 660.4 mm) |
| Upper & Lower Interfaces | Unrestricted Open / Open |
| Active Media Footprint | Approx. 180 Square Feet |
| Intended Extraction Sector | High-Density Ambient Air Separation |
Metallurgy Facilities:
Vents induction furnaces and sinter lines. The oval profile accommodates dense metallic fumes, lowering aerodynamic drag and sustaining clear extraction paths for continuous smelting.
Coal Mines:
Extracts combustible carbon powders at underground conveyor transitions. The 180 sq.ft capacity digests sudden particulate surges, maintaining secure and compliant atmospheric conditions.
New Energy Sector:
Purifies graphite and lithium mixing stations. The stacked open/open configuration saves premium clean-room floor space while ensuring stringent contamination control during battery processing.
HONOR
ISO 14001
ISO 9001
CE
SGS
Patent
Ayater embeds systematic accountability into every B2B filtration component. Prior to global transit, the P199415 compatible Dust Collection Cartridge Filters undergo stringent geometric tolerance assessments-specifically validating the oval curvature-and pleat-spacing integrity checks governed by ISO manufacturing protocols. We supply procurement directors with defect-free, dimensionally precise extraction assets.
A regional smelting facility encountered severe dust bridging between their conventional round filters, causing continuous pressure alarms. To resolve this without installing a larger baghouse, the plant upgraded to the Ayater P199415 equivalent Dust Collection Cartridge Filters. The transition from round to oval geometry instantly created 20% more physical open space between the cartridges. This structural shift eliminated powder bridging entirely, allowing the pulse-jet system to drop the heavy slag dust efficiently. The upgrade reduced their differential pressure by 35% and conserved significant compressor energy.
Interstitial Velocity and Oval Profiling
In heavy industrial ventilation, "interstitial velocity" dictates performance. This metric measures the speed at which dirty air travels upward through the empty spaces between filter elements. If filters are packed too closely together (a frequent flaw in arrays using bulky round cartridges), the upward wind speed becomes so aggressive that it fights the downward cleaning pulses. This keeps the dust constantly in suspension-a phenomenon known as re-entrainment.
The engineering brilliance of oval-shaped Dust Collection Cartridge Filters directly addresses this physics dilemma. By utilizing a narrower, elongated elliptical profile (11.4" x 14.4"), oval cartridges pack the same or greater filtration media area as round filters while leaving significantly wider corridors between adjacent units. This drops the interstitial air velocity dramatically. Consequently, when the reverse compressed air strikes the filter, the dislodged dust encounters minimal upward draft, falling straight into the hopper and restoring baseline permeability seamlessly.
Founded on advanced fluid dynamics and non-woven material science, Ayater directs highly automated, digitized production corridors explicitly tailored for B2B air separation. We integrate precision CNC pleating systems for complex oval geometries with heavy-duty structural assembly. Our overarching business objective is to eliminate intermediary supply friction, outfitting international processing plants directly with the rigorous, compliant extraction hardware necessary for continuous industrial productivity.
| 8PP-46638-00 | 8PP-46774-00 |
| 8PP-46930-00 | 8PP-47400-00 |
| 8PP-47402-00 | 8PP-47404-00 |
| 8PP-47405-00 | 8PP-47730-00 |
| 8PP-47936-00 | 8PP-48001-00 |
| 8PP-48004-00 | 8PP-48105-00 |
| 8PP-48106-00 | 8PP-48107-00 |
| 8PP-48507-00 | 8PP-48508-00 |
| 8PP-48509-00 | 8PP-48512-00 |
| 8PP-48665-00 | 8PP-71215-00 |
If you want specific information about other models, please contact us directly!
Hot Tags: p199415 dust collection cartridge filters, China, manufacturers, suppliers, factory, customized
