The hydraulic oil filter element is a mesh made of multi-layer metal stamping, which is manufactured through special lamination and vacuum sintering processes. It is a new type of filter material with high mechanical strength and overall rigidity. The meshes of each layer of wire mesh are interlaced to form a uniform and ideal filtering structure, which not only overcomes the low strength, poor rigidity, and unstable mesh shape of ordinary metal wire mesh, but also can control the pore size of the material. Permeability and strength characteristics are reasonably matched and designed, so that it has excellent filtration accuracy, filtration resistance, mechanical strength, wear resistance, heat resistance and processability. The overall performance is significantly better than that of sintered metal powder, ceramics, Fiber, filter cloth, filter paper and other types of filter materials.
1.Performance characteristics
1. The filter element is made of glass fiber/stainless steel mesh imported from the United States, which has the advantages of convenient sewage discharge, large circulation area, small pressure loss, simple structure, small volume, light weight, uniform filter material, etc.
2.The compatibility of the filter material is suitable for the filtrationofgeneralhydraulic oil.
3.The filter element is supported by the solid filter material on both sides and the stable filter material.
2.Replacement time of hydraulic filter element:
1.In addition to checking the color, viscosity, and odor of the oil, the oil pressure and air humidity should also be checked.If you are working in a higher altitude and lower temperature environment, you must also pay close attention to the carbon content, colloids (olefins)and sulfides in the engine oil,as well as the impurities, paraffin and moisture content in the diesel.
2.Hydraulic excavators generally need to replace the hydraulic oil after 2000 hours of operation, otherwise it will pollute the system and cause system failures. According to statistics, about 90% of hydraulic system failures are caused by system pollution
3.In special circumstances, if the machine uses low-grade diesel (the sulfur content in the diesel oil is 0.5%~1.0%), the diesel filter and the machine filter should be replaced every 150h; the diesel filter should be replaced every 60h if the sulfur content is above 1.0%. Machine filter. Use crushers, vibratory rammers and other equipment that has a heavy load on the hydraulic system. The replacement time of the hydraulic return filter element, pilot filter element and respirator filter element is every 100h.
3.Application areas:
1.Used for the filtration of the hydraulic system of the rolling mill and the continuous casting machine and the filtration of various lubricating equipment.
2.Thermal power and nuclear power: lubrication systems, speed control systems, bypass control systems for gas turbines, boilers, oil purification, feedwater pumps, fans, and dust removal systems.
3.Glass: blowing bottles and glassware, blowing lamps and electronic tubes, combustion gas, transmission of raw materials, glass etching and polishing and drilling, conveying glass, pneumatic control, vacuum hanging plate; air separation manufacturing N2: float glass
4.Oil refinery: combustion gas, draining and cleaning oil circuits, lifting and elevators, drive control systems, catalyst recirculation, sandblasting, painting
Hot Tags: HC9601FDP8H filter element, China, manufacturers, suppliers, factory, customized, Atlas Copco 1621737600 Air Filter Element, Mahle Oil Filter Replacement PI23010RNSMX10, HYDAC Filter, Argo Filters Catalogue P3 0730 51
