0240R0100N filter element

1.Structure

1. Filter element end cover: machined end cover, spin stamping cold plate end cover, ABS engineering plastic end cover, stainless steel end cover, customized end cover

2.Filter frame: spiral frame, punching plate frame, plastic frame, stainless steel frame, customized frame

3. Filter element filter layer: metal filter layer, paper filter layer, glass fiber filter layer, non-woven filter layer, customized filter layer

4. Filter element meeting: meeting sheet meeting (798 glue), potting glue meeting, roll welding meeting), customized meeting

2.Feature

1. It is divided into high pressure section, medium pressure section, oil return section and oil suction section

2.  Divided into high, medium and low precision grades. 2-5um is high precision, 10-15um is medium precision, and 15-25um is low precision.

3. The hydraulic filter element increases the filter area. Generally, the filter layer is folded into a corrugated shape. The pleated height of the hydraulic filter element is generally below 20 mm

4. The pressure difference of hydraulic filter element is generally 0.35-0.4MPa, but some special filter elements are required to withstand high pressure difference, and higher requirements are 32MPa or even 42MPa equivalent to the system pressure.

3.Tips

The product filter material can be customized, and the basic parameters change with the change of the filter material. The filter material has a maximum critical value, and the specific attributes can be consulted by sales and technical personnel.