Sintered wire mesh laminate media is composed of 5-layer or multi-layer stainless steel wire mesh, which is special canlendering and sintering in vacuum oven, to create a new filter material with high strength and rigidity. Its interlaced mesh forms a uniform and ideal filtration structure. As a new filter material, it not only overcomes the disadvantages of ordinary metal mesh, such as lower strength, poor rigidity, unstable hole shapes, but has excellent performances such as high precision and strength,efficient flow restriction, mechanical and resistance to abrasion,heat by reasonably arranging its porosity, permeability and strength. Therefore, its total performance has obviously advantages than sintered powder, ceramic, fiber cloth, other filter material.
1.Sintered Stainless Steel Filter Tube Features:
1. Filtration rating from 1 µm to 250 µm.
2. The minimum outer diameter can be as small as 10 mm.
3. High mechanical strength, and can maintain a steady filtration performance under high pressure.
4. This type of cylindrical sintered filter element is easy to clean, especially for backwashing.
· Industrial process cartridges are manufactured from 304 or 316 stainless steel wire cloth material
· Mesh Patterns — Square Weave, Twilled Dutch Weave, Plain Dutch Weave
· Designed and tested to withstand collapse pressure ratings of 300-6,000 PSID
· Temperature ratings from -100°F (-73°C) to 500°F (260°C)
· Various micron ratings available from 2um to 1000um (nominal)
· Various mesh sizes available
·AYATER FILTER Stainless Steel filter elements are cleanable for long service life
Crimped construction, usually used in applications for batch processing, is a process particularly applicable for Industrial Process Cartridges. Industrial process cartridges,with a lightweight core and a support ring, are typically pleated or cylindrical (wrapped) .Our cartridges are produced of stainless steel using crimping and welding, instead of using brazing or epoxy bonding to overcome the temperature and compatibility limitations of cellulose or synthetic fiber cartridges.Our crimped construction stainless cartridges are cleanable, reusable and can withstand various pressures up to 60 PSI (300 PSID elements are also available) because entirely made of 304 or 316 stainless steel. These cartridges are also good up to 500°F (260°C) instead of the usual 250° F. Our filters are also not affected by common corrosive fluids. Particle retention can be as fine as 5um. So as to increase surface area, element media can be pleated. To prevent pleat collapse, cartridges rated at 100um or finer have an underlying support layer of coarser stainless steel mesh .
Ayater FILTER elements are well restored to service by back flushing, ultrasonic or other nonabrasive cleaning techniques. This is particularly valuable and cost-effective in applications involving hazardous fluids. Costs are significantly reduced because our elements are cleanable disposal .
Hot Tags: stainless steel sintered filter, China, manufacturers, suppliers, factory, customized
