The function of the oil-air separator is to separate the oil in the compressed air to make the compressed air cleaner. After the oil is separated, it passes through the oil return pipe to make the oil circulate in the compressor. The oil and gas separator produced by Sanya uses anti-corrosion materials, fine welding technology and the use of the latest double-sided adhesive to ensure that the oil has a high mechanical strength, and the oil and gas separator can work normally at a high temperature of 120 degrees Celsius. The skeleton and flange of Thirty Asia's oil and gas separator are made of 316L stainless steel, and the filter layer adopts 4-layer filtration, with a filtration accuracy of 0.1 micron, an oil content of less than 3PPm, and a service life of thousands of hours.
Compressed air filtration plays a hugely important role in any compressor installation. Having a high-quality air compressor filter will protect your system from particulates, dirt, dust, solid particles, and oil. Harmful contaminants like these can cause damage to your equipment and downstream machinery, wearing down parts and causing blockages.
Without a filter, contamination can even affect your manufactured product, causing loss of production and inevitably landing you with a hefty bill. Therefore, it is essential that high-performing filters are used. Poor quality filters may offer a reduced performance, leading to large pressure drops and increasing your energy bill.
2. When should I change the filter element?
To ensure a continuous supply of high-quality compressed air is always available (and to help keep energy costs low) filter elements must be replaced periodically as, unfortunately, filter elements do not last forever.
The filter element should be exchanged at least every 12 months. Applications with higher annual operating hours or a very high requirement of purification require shorter exchange intervals.
3. Air compressor oil filter element parameters
| Filter material: made of HV glass fiber | |||||
| Service life: about 3500~5200h | |||||
| Filtration accuracy: 0.1µm | |||||
| Initial pressure difference: ≦0.02MPa | |||||
| Filtration efficiency: 99.99% |
4. Advantage
1. Thickened shell: 0.8mm thick galvanized sheet is used to withstand high pressure and will not be deformed under high pressure
2. Imported filter paper: American HV glass fiber filter paper, with good oil and gas separation effect as low as 3ppm, initial pressure difference <0.02MPA, which can ensure the quality of oil, and the machine does not need to replenish oil during a maintenance cycle
3. High-pressure oil does not run off
Easy maintenance, clean and no residue
4. Winding: The skeleton process increases the compressive strength of the skeleton. There are no solder joints at the joints of the skeleton. The product is more beautiful and practical. The steel plate is made of high-quality steel, which is strong and durable.
Hot Tags: 6.3789.0 air oil separator, China, manufacturers, suppliers, factory, customized, Oil Mist Filter Element CMD10048, Ultrafilter Compressed Air Filter 1C020281, Ultrafilter Compressed Air Filter 1C020291N, Air Inlet Filter 5929 0101 20, Air Compressor Hydraulic Oil Filter CST45003 03, SANSUNG Air Compressor Air Filter CST71005
