Automatic Back Flushing Filter

Automatic back flushing filters can filter water, emulsions and coolants and provide a self-cleaning function that improves the quality of the filter media and extends the life of downstream equipment. When contaminants accumulate in the filter element to a certain level, the backwash function can be triggered to clean the filter equipment. And you can rest assured that the flushing process will not allow captured contaminants to re-enter the filter media.

1.Automatic continuous filtration in-line, continuous filtration during. backwashing, reducing downtime and maintenance costs.

2.The control system can be set to monitor the pressure and time of the fluid by itself.

3.The automatic back flushing filter has a high micron grade, a large effective filtration area, a small pressure drop, and a high backwashing efficiency.

4.Automatic continuous filtration in-line, continuous filtration during backwashing, reducing downtime and maintenance costs.

5.The control system can be customized to monitor pressure and time settings for a variety of fluids.

6.The gap type high-performance filter is adopted, which has the characteristics of high precision, large effective filtration area, small pressure drop and high backwashing efficiency.

7.A wide range of available media are suitable for filtering a wide range of raw water, cooling water, process water, and low-viscosity fluids with viscosities of less than 40 mPa.s and impurities of less than 300 ppm.