Products Description The amine solution filter element is designed specifically for the precise removal of solids, catalyst fines, and degradation byproducts from amine-based process streams. Engineered for reliability, our filter element ensures extended service life, consistent amine purity,...
The amine solution filter element is designed specifically for the precise removal of solids, catalyst fines, and degradation byproducts from amine-based process streams. Engineered for reliability, our filter element ensures extended service life, consistent amine purity, and minimal operational downtime.
Advanced Anti-Fouling Coating
Proprietary surface treatment reduces fouling and extends service life by up to 30%.
High Flow Capacity
Optimized pleat geometry increases contaminant holding capacity, reducing element change frequency.
Low Pressure Drop
Engineered media gradients ensure minimal initial differential pressure across a range of flow rates.
Burst Pressure Safety Margin
Burst rating at 5× operating pressure for reliable performance under transient spikes.
| Specification | Details |
| Compatibility | Amine (pH, temperature, solvent), corrosion resistance |
| Micron Rating | 5–50 µm (depending on solids loading and turbidity) |
| Pressure Rating | ≥ service pressure (typically 150–300 psig) |
| Temperature Rating | ≥ max operating temp (often 60–120 °C) |
| Beta Ratio (Efficiency) | ≥ β2000 (99.95 % removal at rated micron) |
| Differential Pressure | Low clean ΔP (0.5–1 psid); safe ΔP burst (>10 psid) |
| Element Style | Disposable vs. reusable; pleated vs. sintered vs. wound |
Amine Solution Filter Element - High-Efficiency Filtration for Industrial Amine Systems
Q: Can I backwash the PTFE-backed pleated elements?
A: No, PTFE membrane elements are single-use. Stainless sintered elements can be backwashed.
Q: What is the recommended differential pressure replacement limit?
A: Replace disposable elements when ΔP exceeds 1.0–1.5 psid; check housing gauge regularly.
Q: Are these filters compatible with other solvents (e.g., glycol)?
A: Yes, media and seals are compatible with mono- and diethylene glycol, subject to temperature limits.
Hot Tags: amine solution filter element, China, manufacturers, suppliers, factory, customized
