The amine solution filter is designed to protect amine-based gas desulfurization and CO2 capture systems.
The amine solution filter is designed to protect amine-based gas desulfurization and CO2 capture systems. It withstands corrosive amine environments and handles stubborn contaminants in solution such as particulates, heat-stable salts, iron sulfide and hydrocarbon residues. The presence of these problems can disrupt process efficiency, accelerate equipment wear and increase operating costs.
Why This Matters to You:
Durable Under Harsh Conditions
Resistant to sour gas, pressure cycling, and high temperatures.
Stable Differential Pressure
Maintains flow consistency with minimal fouling.
Extended Change-Out Intervals
Lasts up to 4× longer than pleated polymer filters.
Zero Fiber Migration
No fibers are shed into the amine circuit during filtration.
| Specification | Details |
| Pore Ratings | Standard options at 5 μm, 10 μm, 25 μm (others available upon request) |
| Temperature Range | –10 °C to 120 °C (fluid-dependent) |
| Pressure Rating | Max 20 bar (290 psi) |
| Flow Capacity | 100 to 2,000 liters/minute depending on cartridge size |
| Lengths Available | 10", 20", 30", 40" (custom lengths supported) |
| Seal Options | Viton, EPDM, or FFKM for aggressive solvents |
| Material | PP, PTFE bonded stainless steel and fiberglass available (specify material) |
Amine Solution Filter - Engineered for Reliable Gas Treatment & Cost-Efficient Operations
Q: How do I know when the element needs changing?
A: Use pressure differential (ΔP) as a guide. We recommend replacing at a ΔP of 0.5 bar to avoid flow restriction.
Q: Is it compatible with sour gas service?
A: Yes. The 316L stainless steel construction handles H₂S-rich environments with no corrosion risk under typical conditions.
Q: Can you help design filters for existing housings?
A: Absolutely. Send us your housing specs or a sample element-we can match or improve it.
Hot Tags: amine solution filter, China, manufacturers, suppliers, factory, customized
