The wind power filter can effectively remove suspended solids, particles, etc. in the liquid. Large flow rate and small pressure loss. High residue load and long service life. Can withstand high filtration pressure. According to the nature of the liquid to be filtered, the wind power gearbox filter element has a variety of different materials to choose from, so that the filter element and the filtrate have good compatibility.
Main performance:
1. High filtration precision, small pressure difference, large flow rate, large dirt holding capacity and long service life;
2. The filter pore size is small inside and large outside, which has a good deep filter effect;
3. The filter element is made of different materials to ensure various liquid filtration requirements and achieve the filtering effect. the
Main technical performance indicators:
1. Filtration accuracy: 1μm, 5μm, 10μm, 20μm, 30μm, 50μm, 75μm, 100μm;
2. Outer diameter of filter element: φ60mm, φ65mm;
3. Inner diameter of filter element: φ28mm, φ30mm;
4. Polypropylene wire-wound filter elements can be used for non-organic solutions such as water, acid and alkali, chemical solutions, etc., and the operating temperature is ≤60°C
5. The center rod of the absorbent cotton fiber filter element is made of stainless steel, which is used for organic solvents, water, oil, alkaline solutions, beverages, medicines, etc., and the operating temperature is 120°C. the
6. Filter element length: 10″, 20″, 30″, 40″
7. High withstand voltage: ≤0.5MPa; large pressure drop: 0.2MPa. the
8. High working temperature: Polypropylene thread: polypropylene skeleton ≤ 60°C; stainless steel skeleton ≤ 80°C. Absorbent cotton thread: stainless steel skeleton ≤120℃.
