The hydraulic oil filter element USES the advantage of glass fiber filter material, the glass fiber can very effectively separate the lubricating oil droplets from the diameter of 50~ 0.01m. Very effective, better performance than other materials. Examples are as follows:
Simple working process of high efficiency condensed filter:
After the compressed air enters the middle of the filter element, it is collected by the filter layer through gravity, collision, interception and osmosis. When the oil droplets are removed by the filter layer, they are first collected. Small oil droplets are first polymerized into large oil droplets. When the mass of the large oil droplets is large enough, they will settle to the bottom of the filter layer. It then flows into the filter tank and is removed from the system by manual or automatic oil discharge device.
In the hydraulic system, the Ayater filter element is used to filter out solid particles and colloidal substances in the working medium, effectively controlling the pollution degree of the working medium. This series of filter elements are the substitute products for the imported filter elements. In the process of selecting and using the hydraulic oil filter elements, the approval of oil products should be paid attention to first. Generally speaking, the filter element is for the filtration of hydraulic oil, and the material will also choose the corresponding filter material, such as: glass fiber, filter paper, etc.; If there is a need to filter corrosive media, the filter material needs to be replaced, otherwise it will cause significant damage to the system.
